How To Unlock A Jeep Wrangler With A Coat Hanger

How To Unlock A Jeep Wrangler With A Coat Hanger, <h1>How To Unlock A Jeep Wrangler With A Coat Hanger</h1> <h2>Introduction</h2> <p>Getting locked, Blog, how-to-unlock-a-jeep-wrangler-with-a-coat-hanger, KampionLite

How To Unlock A Jeep Wrangler With A Coat Hanger


Getting locked out of your car can be a frustrating experience, especially if you do not have access to a spare key. However, with the right tools and knowledge, you can unlock your Jeep Wrangler with a coat hanger. In this article, we will guide you through the steps required to successfully unlock your vehicle using this method.

What You Will Need

Before we begin, make sure you have the following items:

  1. A coat hanger
  2. A pair of pliers
  3. A small, flathead screwdriver
  4. A cloth or piece of fabric

Step-by-Step Guide

Step 1: Shaping the Coat Hanger

The first thing you need to do is shape the coat hanger into a tool that can be used to unlock your Jeep Wrangler. Here’s how:

  1. Using the pliers, straighten out the coat hanger as much as possible.
  2. Bend one end of the coat hanger into a small hook shape. This will be the part used to unlock the car.
  3. Make a 90-degree bend near the hook to create a handle for better control.

Step 2: Accessing the Door Lock

Now that you have your coat hanger ready, it’s time to gain access to the door lock. Follow these steps:

  1. Slide the cloth or piece of fabric between the top corner of the driver’s side door and the door frame to prevent any damage.
  2. Insert the small, flathead screwdriver into the seam where the window and door frame meet.
  3. Gently pry the door frame back to create a small gap.
  4. Carefully slide the coat hanger with the hook end first into the gap you created.

Step 3: Unlocking the Car

With the coat hanger inserted into the gap, it’s time to unlock your Jeep Wrangler. Here’s what you need to do:

  1. Once the coat hanger is inside the car, reach for the lock mechanism near the door handle.
  2. Gently maneuver the hook end of the coat hanger until it catches onto the lock mechanism.
  3. Apply slight pressure to the coat hanger and pull upwards to unlock the car.

Step 4: Confirming Successful Unlock

After following the previous steps, check if your Jeep Wrangler is successfully unlocked. Here’s what you should do:

  1. Hold onto the coat hanger and pull it out of the door gap.
  2. Attempt to open the driver’s side door from the outside to confirm that it is unlocked.
  3. If the door opens, congratulations! You have successfully unlocked your Jeep Wrangler with a coat hanger.


While using a coat hanger to unlock your Jeep Wrangler is an effective method, there are a few precautions you should keep in mind:

  1. Only use this method if you are locked out of your own vehicle and have the necessary legal rights to unlock it.
  2. Be extra careful not to damage the door frame or scratch the paint while prying it open.
  3. If you encounter any resistance or difficulty while unlocking the car, stop immediately and seek professional help.
  4. Always remember to lock your vehicle properly and secure your keys to prevent future lockout situations.


Unlocking a Jeep Wrangler with a coat hanger is a handy skill to have in case of emergencies. By following the step-by-step guide outlined in this article, you can successfully gain access to your vehicle without the need for a spare key. However, it is important to exercise caution and only use this method when necessary and legally justified. Stay prepared and always keep your keys in a safe place to avoid any future lockouts.



Leave a Comment